Products
N30
POLYURETHANIC EXTRA FINE FOAM PAINT ROLLER 3mm
A high density polyurathene foam roller that is perfect for applying epoxy. The thin foam of the article N30 (3 mm) allows you to control epoxy film thicknesss, avoid drips and runs and get a smoother coating overall. The roller has a thin core and is designed to last longer than other foam roller covers.
ZF BE
BRISTLE BUBBLE BUSTER ROLLER – SPIRAL ROLLER
This SIGNUM laminating BRISTLE SPIRAL ROLLER is composed of a mixture of Nylon and Bristles, mounted on a spiral core. Optimal the use for thin tissues and unidirectional fiber. It works good also on irregular surfaces. Low risk to cut the fibre. Caution: the spiral form and the bristles could lift up the fibre and roll up the fibre on the roller
M04
POLYESTER CONTINUOUS THREAD PAINT ROLLER
This roller made of a special Polyester Continuous filament is ideal for applications of Antifouling, Gelcoat, Primers, Water based and solvent based paints, epoxy resins. Do not lose fur
Z KUN
EXTRACTION WEDGES
Fabricators use plastic release wedges to help remove parts from a mold.
Wedges are inserted around the perimeter of the mold, between the mold and the part, and then gently driven in until the piece pops out.
It is necessary to use a sufficient number of wedges at the perimeter, particularly for larger parts: one wedge will not do the job. Each wedge should be tapped, in turn, as you progress around the mold.
Wedges are made of Polypropylene carbonate, so as to not damage the mold or the part.
ZF AB
ALUMINUM BUBBLE BUSTER ROLLER – BARREL SHAPE
This SIGNUM barrel-shaped type of bubble breaker has the excellent deaeration properties of concave surfaces as the grooves follow the direction of the grain and the radial (vertical) design reduces splashing. The fins and edges are made in such a way as to reduce any cuts or tears in the fibers. All the components of our rollers are resistant to all types of solvents